static flash_status_t flash_status;
// Estimate recording time flash_status.estimated_log_seconds = estimate_remaining_time(); } 2m flash - use fmuv3 firmware
I'll help you create a feature for an using FMUV3 firmware (Betaflight target: MATEKF405 or similar F4 with 2MB flash). This feature will be a Blackbox logging manager with adaptive recording that optimizes flash storage. Feature: Adaptive Blackbox Manager for 2M Flash // File: src/main/drivers/adaptive_blackbox.c // Feature: Auto-manages 2MB flash with intelligent recording #include <stdbool.h> #include <stdint.h> #include "platform.h" #include "drivers/flash.h" #include "drivers/flash_m25p16.h" #include "drivers/time.h" #include "build/build_config.h" recording: %d seconds", flash_status
static adaptive_bb_t adaptive_bb_config = { .resolution = 1, .auto_erase = 1, .priority_mode = 0, .max_log_seconds = 180, // 3 minutes max by default .dynamic_rate = 1 }; "ON" : "OFF")
// Smart erase: remove oldest 25% of logs when full static void smart_erase_oldest(void) { if (!adaptive_bb_config.auto_erase) return;
if(strcmp(arg, "adaptive_bb") == 0) { char *subcmd = strtok(NULL, " "); if(subcmd == NULL) { // Show status cliPrintLinef("Adaptive Blackbox Status:"); cliPrintLinef("Flash total: %u bytes", flash_status.total_bytes); cliPrintLinef("Free: %u bytes (%u%%)", flash_status.free_bytes, 100 - flash_status.percent_used); cliPrintLinef("Est. recording: %d seconds", flash_status.estimated_log_seconds); cliPrintLinef("Resolution: %s", adaptive_bb_config.resolution == 0 ? "Low" : adaptive_bb_config.resolution == 1 ? "Normal" : "High"); cliPrintLinef("Auto erase: %s", adaptive_bb_config.auto_erase ? "ON" : "OFF"); cliPrintLinef("Dynamic rate: %s", adaptive_bb_config.dynamic_rate ? "ON" : "OFF"); } else if(strcmp(subcmd, "resolution") == 0) { uint8_t val = atoi(strtok(NULL, " ")); if(val <= 2) { adaptive_bb_config.resolution = val; cliPrintLinef("Resolution set to %d", val); } } else if(strcmp(subcmd, "auto_erase") == 0) { adaptive_bb_config.auto_erase = atoi(strtok(NULL, " ")); cliPrintLinef("Auto erase set to %d", adaptive_bb_config.auto_erase); } else if(strcmp(subcmd, "max_time") == 0) { adaptive_bb_config.max_log_seconds = atoi(strtok(NULL, " ")); cliPrintLinef("Max log time set to %d seconds", adaptive_bb_config.max_log_seconds); } else if(strcmp(subcmd, "dynamic") == 0) { adaptive_bb_config.dynamic_rate = atoi(strtok(NULL, " ")); cliPrintLinef("Dynamic rate set to %d", adaptive_bb_config.dynamic_rate); } } }