Clock Divider Verilog 50 Mhz 1hz Apr 2026

// Stage 2: 100 Hz → 10 Hz (divide by 10) clock_divider #(100, 10) stage2 (clk_100hz, rst_n, clk_10hz);

// Stage 1: 50 MHz → 100 Hz (divide by 500,000) clock_divider #(50_000_000, 100) stage1 (clk_50mhz, rst_n, clk_100hz); clock divider verilog 50 mhz 1hz

always @(posedge clk_50mhz or negedge rst_n) begin if (!rst_n) begin count <= 0; clk_1hz <= 0; end else begin if (count == HALF_CYCLE) begin count <= 0; clk_1hz <= ~clk_1hz; end else begin count <= count + 1; end end end endmodule module clock_divider #( parameter INPUT_FREQ = 50_000_000, // Hz parameter OUTPUT_FREQ = 1 // Hz ) ( input wire clk_in, input wire rst_n, output reg clk_out ); localparam MAX_COUNT = (INPUT_FREQ / OUTPUT_FREQ) / 2 - 1; // For 50 MHz to 1 Hz: MAX_COUNT = 24,999,999 // Stage 2: 100 Hz → 10 Hz

always @(posedge clk_in or negedge rst_n) begin if (!rst_n) begin counter <= 0; clk_out <= 0; end else begin if (counter == MAX_COUNT) begin counter <= 0; clk_out <= ~clk_out; end else begin counter <= counter + 1; end end end endmodule `timescale 1ns / 1ps module tb_clock_divider; 10) stage2 (clk_100hz

module clock_divider_50M_to_1Hz ( input wire clk_50mhz, // 50 MHz input clock input wire rst_n, // Active-low reset output reg clk_1hz // 1 Hz output clock ); // 50 MHz → 1 Hz requires division by 50,000,000 // Count from 0 to 24,999,999 (toggle) then repeat // Total cycles: 50,000,000 = 2 × 25,000,000