Epson L4150 L4160 L4170 Resetter Adjustment Program -

def reset_pad_counter(self): """Reset waste ink pad counter""" if not self.connected: messagebox.showwarning("Warning", "Printer not connected") return if not messagebox.askyesno("Confirm Reset", "WARNING: Resetting the waste ink counter without replacing the\n" "waste ink pads may cause ink leakage and printer damage.\n\n" "Have you replaced the waste ink pads?\n\n" "Proceed with reset?"): return def reset(): self.progress.start() try: # Send reset command response = self.send_command(self.CMD_RESET_COUNTER, 16) if response: self.log_message("Pad counter reset command sent successfully") time.sleep(1) self.get_counters() # Refresh counters messagebox.showinfo("Success", "Waste ink pad counter has been reset!") else: raise Exception("No response from printer") except Exception as e: self.log_message(f"Reset failed: {str(e)}") messagebox.showerror("Error", f"Reset failed: {str(e)}") finally: self.progress.stop() threading.Thread(target=reset, daemon=True).start()

# Supported models SUPPORTED_MODELS = { 'L4150': {'family': 'L4150', 'ink_count': 4, 'pad_count': 2}, 'L4160': {'family': 'L4160', 'ink_count': 4, 'pad_count': 2}, 'L4170': {'family': 'L4170', 'ink_count': 4, 'pad_count': 2} }

def send_command(self, command, response_length=0): """Send command to printer and return response""" if not self.serial_port or not self.serial_port.is_open: raise Exception("Printer not connected") self.serial_port.write(command) self.serial_port.flush() if response_length > 0: time.sleep(0.2) response = self.serial_port.read(response_length) return response return None Epson L4150 L4160 L4170 Resetter Adjustment Program

def disconnect_printer(self): """Disconnect from printer""" if self.serial_port and self.serial_port.is_open: self.serial_port.close() self.connected = False self.serial_port = None self.status_label.config(text="● Disconnected", foreground="red") self.connect_btn.config(state=tk.NORMAL) self.disconnect_btn.config(state=tk.DISABLED) self.reset_pad_btn.config(state=tk.DISABLED) self.reset_all_btn.config(state=tk.DISABLED) self.log_message("Disconnected from printer")

def log_message(self, message): """Add message to log with timestamp""" timestamp = datetime.now().strftime("%Y-%m-%d %H:%M:%S") log_entry = f"[{timestamp}] {message}\n" self.log_text.insert(tk.END, log_entry) self.log_text.see(tk.END) # Limit log size if int(self.log_text.index('end-1c').split('.')[0]) > 1000: self.log_text.delete(1.0, 500.0) class EpsonResetterAdvanced: """Advanced features for Epson resetter""" Click Connect\n" "4

import tkinter as tk from tkinter import ttk, messagebox, filedialog import serial import serial.tools.list_ports import time import threading import struct import hashlib import os import json from datetime import datetime class EpsonResetter: """Epson Printer Resetter for L4150/L4160/L4170"""

root.mainloop() if == " main ": main()

# Help menu help_menu = tk.Menu(menubar, tearoff=0) menubar.add_cascade(label="Help", menu=help_menu) help_menu.add_command(label="Instructions", command=lambda: messagebox.showinfo("Instructions", "1. Connect printer via USB\n" "2. Select COM port and baud rate (9600)\n" "3. Click Connect\n" "4. Check current waste ink counter values\n" "5. Replace waste ink pads if necessary\n" "6. Click 'Reset Waste Ink Pad Counter'\n" "7. Verify counters are reset to 0\n\n" "Supported models: Epson L4150, L4160, L4170")) help_menu.add_command(label="About", command=lambda: messagebox.showinfo("About", "Epson Resetter Adjustment Program v2.0\n\n" "For Epson L4150/L4160/L4170 printers\n\n" "Use at your own risk. Always replace waste ink pads before resetting."))

def connect_printer(self): """Connect to the printer""" if not self.port_combo.get(): messagebox.showerror("Error", "Please select a COM port") return try: self.serial_port = serial.Serial( port=self.port_combo.get(), baudrate=int(self.baud_combo.get()), bytesize=serial.EIGHTBITS, parity=serial.PARITY_NONE, stopbits=serial.STOPBITS_ONE, timeout=3 ) # Initialize printer self.send_command(self.CMD_INITIALIZE) time.sleep(0.5) # Get printer info self.get_printer_info() self.connected = True self.status_label.config(text="● Connected", foreground="green") self.connect_btn.config(state=tk.DISABLED) self.disconnect_btn.config(state=tk.NORMAL) self.reset_pad_btn.config(state=tk.NORMAL) self.reset_all_btn.config(state=tk.NORMAL) self.log_message("Connected to printer successfully") self.get_counters() except serial.SerialException as e: messagebox.showerror("Connection Error", f"Failed to connect: {str(e)}") self.log_message(f"Connection failed: {str(e)}") except Exception as e: messagebox.showerror("Error", f"Unexpected error: {str(e)}") Click 'Reset Waste Ink Pad Counter'\n" "7