Failed -remote 39-flashing Lock Flag — Is Locked. Please Unlock It First 39--

sf probe sf protect unlock <addr> <len> Connect via JTAG/SWD and run:

STM32_Programmer_CLI -c port=SWD -ob Unlock Or from the GUI: go to → disable read/write protection. Option B – Unlock from bootloader/U-Boot In U-Boot (common on routers/dev boards): sf probe sf protect unlock <addr> <len> Connect

CFE> nvram set flash_lock=0 CFE> nvram commit CFE> reboot If you can share you’re using (STM32, ESP32, router model, etc.), I can give you the exact unlock command. sf probe sf protect unlock &lt

mw 0x<address> 0x12345678 # unlock command (address varies) protect off all erase <start> <end> Or (for SPI/NOR flash): nvram set flash_lock=0 CFE&gt

It sounds like you’re encountering an error message from a device, software tool, or embedded system (possibly a router, network switch, microcontroller programmer, or industrial equipment).