⚠️ 9 µm (Class I) is roughly 0.35 mils. Compare to AAMA 611 which requires 10 µm (0.4 mils) or 18 µm for coastal. Some engineers argue JIS Class I is insufficient for aggressive beachfront buildings.
✅ Unlike the simpler dye spot test (ASTM), JIS’s admittance test gives a numeric value, allowing statistical process control in the anodizing plant. jis h 8625 pdf
⚠️ Surprisingly, the standard does not cover color anodizing (electrolytic or integral color). It assumes clear or naturally toned oxide. For colored anodizing, you must cross-reference JIS H 8601. ⚠️ 9 µm (Class I) is roughly 0
✅ In Southeast Asia, the Middle East, and Japan, contractors will only accept JIS H 8625 Class I. LEED projects often reference it as an equivalent to AAMA 611. 6. Weaknesses & Criticisms ⚠️ Complexity & Cost: Running CASS tests and admittance meters requires dedicated labs. Small anodizers cannot certify to Class I. Expect a 15-25% cost premium over generic anodizing. ✅ Unlike the simpler dye spot test (ASTM),
