Parallel Data Cable (Printer extension cable, with male-female 25 pin connector, and pin to pin through)	A-A type USB cable(for power)



ATMEL89 Adapter	ATMEL PLCC 44 Adapter	TSOP 48 Adapter

FWH/HUB PLCC32Adapter	PLCC32 Adapter	SOIC Adapter(Simplified)
On-Board	On-Board
AC or DC Power Adapter (9V or 12V, 200mA)	SOIC Adapter(Professional)	
		

Naruto Shippuden Ultimate Ninja 5 Ps2 Save Data Apr 2026

This is a detailed content piece on for the PlayStation 2, specifically focused on its save data why it matters, what it contains, how to manage it, and the current state of the games legacy. Unlocking the Full Hidden Leaf: A Deep Dive into Naruto Shippuden: Ultimate Ninja 5 PS2 Save Data For fans of the PS2 era of anime fighters, Naruto Shippuden: Ultimate Ninja 5 (released in 2009 in Japan, 2010 in PAL regions) represents the pinnacle of the long-running Ultimate Ninja series. It was the final Ultimate Ninja game on the PS2 before the franchise moved exclusively to PS3 and Xbox 360 with the Storm series.

Heres everything you need to know about Naruto Shippuden: Ultimate Ninja 5 save data. Out of the box, Ultimate Ninja 5 only gives you a handful of characters: pre-timeskip Naruto, Sakura, Kakashi, and a few others. The bulk of the gameincluding all Shippuden characters like Sasuke (Hebi), Itachi, Pain, and the 4-tails Narutois locked behind progression. naruto shippuden ultimate ninja 5 ps2 save data

Having a proper 100% save file is the  no one wants to wait while you unlock Kakuzu. In fact, most netplay communities require you to use a specific, verified save to ensure all players have the same character data and no hidden stat differences. Final Verdict If youre playing Naruto Shippuden: Ultimate Ninja 5 on original hardware or emulator today, a complete save file is the key to the full experience . It turns a grindy, partially locked fighter into a chaotic, all-characters-available brawler that still holds up as one of the best Naruto games ever made. This is a detailed content piece on for

Need help converting a .max save to .ps2? Let me know, and Ill walk you through PS2 Save Builder step by step. Heres everything you need to know about Naruto

Unlike later Storm games, Ultimate Ninja 5 is a 2.5D, four-button fighter (similar to Marvel vs. Capcom ), featuring a massive roster of over 60 characters. But to access that full roster, unlock secret costumes, and complete the sprawling "Master Road" mode, you need one crucial thing:

Just remember to back up your original save before importing any downloaded file  and always respect the region lock.

Installation Steps


Check the parallel printer port setting in the bios, it should be EPP or Normal.
Check there are any active resident programs that use the printer port, such as TWAIN drivers. You may have to remove it.
Connect one end of the 25 pin SubD parallel cable to PCprinter port
Connect the other end of parallel cable to 25Pins port of the programmer
Connect USB power cable or AC adaptor (Note: if you are working on the EPROM programming. You may need use a AC adaptor, so that you can get Vcc 5.6V and 6.2V when doing programming)
Theyellowpower normal indicator of the programmer should light up, then the programmer power supply is normal.
Run the software
Select devices type
Click the Willem in toolbar to change to PCB3
Set the DIP switch based on the displayed pattern.

 (Note: theLPT portof PC MUSTset to ECP or ECP+EPP during BIOS setup. To enter the BIOS setting mode, you need press "Del" key or "F1" key during the computer selftest, which is the moment of computer just power up.)



Software Version To Use

The softwarecan be download fromdownload.mcumall.com

There are board hardware selection jumper on the board. When set the jumper to PCB3B, then user have to use 0.97ja and before version software.

If the board selection set to PCB3.5, PCB5.0, PCB5.5C, then the software 0.98D6 should be used.



 The softwareinterface:



naruto shippuden ultimate ninja 5 ps2 save data



Hardware Check

After start the program, click test hardwar under Help menu. If the connection and power supply is normal, then appears: "Hardware present" Otherwisecheck if the programmer connects well with PC, or power supply is normal.



Jumper Configuration



PCB3.5/PCB4E

naruto shippuden ultimate ninja 5 ps2 save data 
(Two PLCC32 adapter is not applied on the PCB4E)



PCB5.0

naruto shippuden ultimate ninja 5 ps2 save data



PCB5.5C



naruto shippuden ultimate ninja 5 ps2 save data

Note: the Vcc setting jumper only has effect when you are using AC adaptor as power source. For the USB power only 5V Vcc is available.

For the PCB5.5C, set DIP steps:

1. press DIP Set button twice to check current DIP bit position. Then set it again for ON or OFF.

2. press DIP Bit shift button to shift the DIP bit position to where need to set. And then press DIP Set button twice to check current DIP bit position. Then set it again for ON or OFF.

3. Repeat those steps till all DIP bit ae set same as software indicated.

For PCB5.5C voltage and Special chip selection:

1. Put back the safety jumper.

2. Press the voltage button and hold for 1 second, the voltage LED should move to next. Repeat till desired voltage LED light up.

3. Press the chip selectionbutton and hold for 1 second, the chip LED should move to next. Repeat till desiredLED light up.

4. Remove the safety jumper to lock the selected voltage and chip selection



DIPSwitch (PCB3.5, PCB5.0)

naruto shippuden ultimate ninja 5 ps2 save data 

When programming one chip, followthe program prompt to set DIP switch.



Need help converting a .max save to .ps2? Let me know, and Ill walk you through PS2 Save Builder step by step.

Just remember to back up your original save before importing any downloaded file  and always respect the region lock.