Tsmc Standard Cell Naming Convention Info

| Code | Meaning | |-----------|--------------------------------------------------------| | (none) | Regular height, standard pin placement | | _D | Double-height cell (for higher drive or reduced IR drop) | | _P | Pin access optimization (better routing) | | _F | Flip-pin (mirrored for abutment) | | _CK | Clock-specific cell (low jitter) | | _ISO | Isolation cell (power gating) | | _LS | Level shifter | | _RO | Ring oscillator cell (test) | In N7, N5, N3, TSMC uses multiple metal track heights.

| Code | Vt type | Speed | Leakage | |-------|----------------|-------|---------| | LVT | Low Vt | Fast | High | | RVT | Regular Vt | Medium| Medium | | HVT | High Vt | Slow | Low | | ULVT | Ultra-low Vt | Fastest| Highest | | ELVT | Extreme low Vt | (deprecated in some nodes) | |

[Cell Type]_[Drive]_[Vt][Special Modifier][Height/Width Code] Common examples: INVX1LVT → Inverter, drive 1, low Vt. NAND2X2HVT → 2-input NAND, drive 2, high Vt. DFFARX4RVT → D flip-flop with async reset, drive 4, regular Vt. 3.1 Base Function (Cell Type) | Code | Function | |--------|----------------------------------| | INV | Inverter | | NAND2 | 2-input NAND | | NOR2 | 2-input NOR | | AND2 | 2-input AND | | OR2 | 2-input OR | | XOR2 | 2-input XOR | | DFF | D flip-flop (rising edge) | | DFFR | DFF with asynchronous reset | | DFFS | DFF with asynchronous set | | DFFRS | DFF with both reset and set | | DLH | Latch | | AOI21 | AND-OR-invert (2+1 input) | | OAI21 | OR-AND-invert | | BUF | Buffer | | TIEH | Tie-high (VDD) | | TIEL | Tie-low (VSS) | | DELAY | Delay cell | 3.2 Drive Strength (X ) Indicates relative current drive capability (higher number = larger transistors, faster slew, higher leakage, larger area). tsmc standard cell naming convention

| Field | Example codes | |--------------|----------------------------------------| | Function | INV, NAND2, DFFR, AOI21 | | Drive | X0.5, X1, X2, X4, X8, X16 | | Vt | LVT, RVT, HVT, ULVT, ELVT | | Physical | _D, _P, _F, _CK, _ISO, _LS | | Track height | 6T, 7.5T, 9T (node dependent) |

| Code | Track height (metal 2 pitch) | |--------|------------------------------| | 6T | 6 tracks | | 7.5T | 7.5 tracks | | 9T | 9 tracks (high performance) | DFFARX4RVT → D flip-flop with async reset, drive

| Code | Relative drive | |------|----------------| | X0.5 | Ultra-weak | | X1 | Unit drive | | X2 | 2× unit | | X4 | 4× unit | | X8 | 8× unit | | X16 | Max drive |

<Base Function> <Drive Strength> <Threshold Voltage> <Physical Variant> <Metal/Pitch Variant> Or more concretely: AOI21 | | Drive | X0.5

End of Paper

Older nodes (e.g., 180nm, 130nm) may use SVT (Standard Vt) instead of RVT. 3.4 Physical Variant Modifiers These indicate special layout arrangements.

INVX4 drives four times stronger than INVX1 . 3.3 Threshold Voltage (Vt) TSMC offers multiple Vt options to trade leakage power vs. speed.